-
Add to Cart The item has been added Darwin Microfluidics
PTFE Sealing TapeStandard sealing tape in PTFE to be used with microfluidic connectors, ensuring a leak-free connection of your microfluidic setup. 12 meters roll, width of 12 mm, and thickness of 0.1 mm. General Use...3.10€ -
Choose Options microfluidic ChipShop
500 µL Single Tank with Luer Interface - Fluidic 387 (pack of 10)The Liquid Storage Tanks by Microfluidic ChipShop, with a 500 µL capacity, are designed to seamlessly fit female Luer ports of ChipShop and other compatible microfluidic chips. Available in opaque or...25.00€ - 25.50€ -
Choose Options Darwin Microfluidics
Barbed Check ValveOne-way barbed check valves with very low unlock pressure (< 20 mbar / 0.3 psi) to prevent backflow and support recirculation setups. General These check valves are designed for recirculation setups...10.60€ - 19.80€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-cv Check Valve for Bartels MicropumpsA passive check valve to prevent backflows when your Bartels BP7 or mp6 micropump is switched off. General Prevent your liquid from flowing back when your Bartels BP7 or mp6 micropump is turned off...44.00€ -
Choose Options IDEX Health & Science
Manifold 4 Ports Cross 1/4"-28 ETFEMerge or split microfluidic flows with this Cross Assembly manifold: the four outputs allow for multi-functional use as a flow splitter or flow combiner. Optional 1/4-28 fittings for 1/16" OD or 1/8"...38.30€ - 52.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-damper for Bartels MicropumpsThe mp-damper is made to reduce pulsations in the flow generated by the Bartels BP7 and mp6 micropumps. General Get a more even flow rate by reducing its pulsatility! The mp-damper was designed to...29.00€ -
Choose Options ELVEFLOW
Microfluidic Reservoir Flat Seal Ring Gasket SetA set of 4 Viton fluorocarbon rubber replacement gaskets for use with Eppendorf (1.5 mL) and Falcon (15 mL or 50 mL) reservoirs. General Battered and flattened by daily manipulations, life is not...55.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Reservoir for PDMS Chip - XXSGet the closest of your microfluidic chip with these reservoirs! This is particularly useful when you need to work with very low flow rates and low volumes. General Minimize your system's internal...119.00€ -
Add to Cart The item has been added IDEX Health & Science
Microfluidic Manifold 3 Port T-junction for 1/8" ODMerge or split microfluidic flows with this T-junction manifold: the three outputs allow for multi-functional use as either a flow splitter or flow combiner. This assembly comes complete with 1/4-28...47.10€ -
Choose Options microfluidic ChipShop
200 µL Tank with Flat Cap - Luer Interface (pack of 10)200 µL tanks to be fixed to female Luer ports on ChipShop microfluidic chips and store liquids. Flat cap version. Sold in packs of 10 tanks. General With their Luer interface, these 200 µL tanks...25.00€ -
Choose Options Emulseo
FluoSurf Nonionic Surfactant - NeatFluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with...410.00€ - 415.00€ -
Choose Options Innofluid
Replacement Film for Fluid Pulse Damper (pack of 5)Replacement films for Fluid Pulse Dampers, a device used to smooth out peristaltic oscillations. Available in packs of 5 and different sizes, made of silicone or FKM. General Enhance the performance...11.50€ - 34.60€ -
Choose Options IDEX Health & Science
Manifold 5 Ports 1/4-28 PEEKMerge or split up to 4 microfluidic flows using this 5-port PEEK manifold with PEEK fittings and ETFE ferrules for 1/16" or 1/8" OD tubing. General This PEEK Manifold Assembly can be easily used as a...137.40€ - 183.80€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Sample Injection / Shut-off ValveAn easily installable and infinitely reusable microfluidic valve to quickly stop a flow or inject a sample. Compatible with standard 1/4-28 microfluidic fittings. General Inject a microfluidic...119.00€ -
Add to Cart The item has been added microfluidic ChipShop
200 µL Tank - Mini Luer Interface (pack of 10)These Fluidic 926 200 µL tanks with flat caps connect to female mini Luer ports on ChipShop microfluidic chips. Sold in packs of 10 tanks. General With their mini Luer interface, these 200 µL tanks...25.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Manifold 13 PortsMerge or split up to 12 microfluidic flows using this 13-port manifold, supporting 1/4-28 microfluidic fittings. General A manifold with 13 1/4-28 ports to evenly split or merge your liquid/airflow...185.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-f Filter for Bartels MicropumpsProtect your Bartels micropumps from dust and particles, filter porosity 20 - 60 µm. General Protect your fluidic systems from particles by connecting this filter upstream of your Bartels micropump...61.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic High Pressure Reservoir 350 mLA large 350 mL pressure-proofed reservoir for high-pressure microfluidic applications up to 8 bar. Manufactured in PTFE, the cap ensures a secured connection between the glass bottle and your...599.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Dyes Channels Visualization KitA set of color dyes to visualize your microfluidics flows. General Visualize your flows in a microfluidic chip with this set of food dyes. These water-based concentrates can be used to easily...59.00€ -
Add to Cart The item has been added Emulseo
Fluo-Break Emulsion BreakerThe Fluo-Break solution is an emulsion breaker from Emulseo. It is specifically developed to disrupt droplets that were stabilized with FluoSurf. Supplied in a glass vial of 10 mL. General The...155.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-hc Hose Clamps for Bartels Micropumps (pack of 10)Secure the connection between your tubing and your BP7 or mp6 micropump to prevent leakages. Pack of 10 units. General Hose clamps for Bartels BP7 and mp6 micropumps, prevent any unwanted...22.00€ -
Choose Options ELVEFLOW
Microfluidic Reservoir Holder for Eppendorf and Falcon TubesA versatile and autoclavable rack to hold up to 4 independent tubes: 1.5 mL Eppendorf (XS), 15 mL Falcon (S), 50 mL Falcon (M). This holder allows a convenient and sturdy setup with microfluidic...580.00€ -
Choose Options IDEX Health & Science
Inline 10-32 FilterInline filters are used to prevent your microfluidic chip from being clogged because of particles in your liquids. These filters, manufactured in PEEK, are fully biocompatible and can be mounted...98.80€ - 99.30€ -
Choose Options Emulseo
FluoSurf-O Nonionic Surfactant in Fluorinated OilFluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with...220.00€ - 2,454.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
