The Cross-Shaped Channel Chip - W 50 µm H 50 µm channel Fluidic 160 is a microfluidic device designed for handling two separate microchannels on a single chip. It features precise channel dimensions with a width of 50 µm, height of 50 µm, and individual channel selection enabled by design. The chip offers a two-channel configuration, supporting simultaneous usage while allowing control over different flow paths. Volume handling is engineered for analytical and experimental reliability.
General
The cross-shaped channel chip Fluidic 160 possesses two separate channels on one chip. Each channel is equipped with three inlet channels, one of those with, one without a channel offset. Each channel features the following dimensions: * Channel depth: 50 µm * Channel width: 50 µm * Channel length from crossing: 53.3 mm
Features & Benefits
- Two Separate Microchannels: Enables parallel analysis or processing in a controlled environment, increasing throughput.
- Three Inlet Channels Per Channel: Each channel offers flexible sample or reagent routing. One inlet with and one without channel offset improves experimental control.
- Mini Luer Interface: Standardized fluidic connection ensures compatibility with laboratory systems, minimizing setup complexity.
- Transparent Material: Facilitates easy visual inspection during use and supports optical detection techniques if required.
- Non-Treated Surface: Preserves native material properties and is suitable for a range of biological and chemical applications.
- Multiple Material Options: Choose between Topas and PMMA for varying thermal and chemical compatibility.
The Cross-Shaped Channel Chip - W 50 µm H 50 µm channel Fluidic 160 is engineered to support demanding microfluidic workflows. The two-channel layout and precise dimensioning deliver consistent and predictable fluid dynamics. Researchers and professionals benefit from straightforward integration into their experimental setups.The device adapts to a variety of liquid handling tasks, with easy-to-use mini Luer connections and clear construction. A choice between Topas or PMMA construction offers flexibility for compatibility with your protocol or solvent requirements. No surface modification means the chip’s performance stays consistent and materials remain inert for standard use.
Applications
Ideal for microfluidic research and development, assay automation, and analytical sample preparation.
- Fluid mixing and reaction studies
- Parallel sample or reagent processing
- Flow characterization and hydrodynamic experiments
Content
1x Cross-Shaped Channel Chip - W 50 µm H 50 µm channel Fluidic 160
Specifications
| SKU | CS-10000326 | CS-10001866 |
| Design element | Channel | Channel |
| Material | Topas | PMMA |
| Material chip body | Mcs-COC 13 | mcs-PMMA 08 |
| Material chip lid | mcs-foil 011 (Topas; 140 µm; Tg 78°C) | mcs-foil 147 (PMMA; 175 µm; Tg 109°C) |
| Color | Transparent | Transparent |
| Interface type | Mini Luer interface | Mini Luer interface |
| Surface treatment | Not treated | Not treated |
| Membrane | no membrane | no membrane |
Documentation
Cross-Shaped Channel Chip - W 50 µm H 50 µm channel Fluidic 160 datasheet
Check the chemical compatibilities for this product here:
Topas - Chemical Compatibility Chart
PMMA - Chemical Compatibility Chart
