L100-1F Intelligent Peristaltic Pump

This precise peristaltic pump covers a wide range of laboratory applications up to 266.7 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment.

Various pump heads are available from 1 up to 8 channels. Silicone tubing included with each pump channel.

General

The L100-1F is a compact yet powerful precision peristaltic pump for accurate dispensing over a wide range of flow rates. Program multi-step workflows from the convenient touch screen, various configurations of pump heads, and channels available.

• 7" LCD color touch screen and intuitive display: program your pump directly from the built-in interface
• Control your pump from the touch screen, footswitch, analog signal, and communication commands, combined with a variety of interfaces (USB, RJ11, DB9, etc.) for easy system connection
• Multiple control modules designed for a wide variety of applications, including routine and multi-step complex applications:
• 9 running control modules: constant, ramp up, ramp down, stepped up, stepped down, sine, constant dispensing, ramp up dispensing. ramp down dispensing
• 8 logic control modules: direction, delay, event trigger, status output, pause, jump, loop, stop

The L100-1F can dispense fluids from 1.5 µL/min to 266.7 mL/min (0-100 rpm CW/CCW), with a speed resolution of 0.1 rpm.

Four different pump heads are available. Each of them allows you to create a specific setup in terms of number of channels, tubing, number of rollers, and flow range. In the Specifications tab, a table lists the tubing requirements and the maximum flow rate possible for each pump head.

Tip: Adding rollers will allow a more accurate and less pulsatile flow, but a lower max. flow rate.

Silicone tubing included with each channel:

• DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
• YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
• YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
• FG15-13: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
• FG25-13: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
• DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
• DG15-28: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD) with slip-on tubing stops

Pump functions

Display

All the intelligent peristaltic pumps have a 7 inch color display, full touch screen, and with an intuitive graphic interface to provide easy-to-use operations:

• the 7 inch color display shows different useful information simultaneously
• the intuitive graphic interface and full touch screen allow you to quickly set up the application process
• the screen is unaffected by dust and can be used with gloves

Programs

The integrated software allows you to customize parameters by programming, and the parameter programs can be stored and easily recalled:

• 8 parameter programs of up to 10 steps can be configured and stored
• program name can be easily defined by letters and numbers
• the preset external control program is for remote control through external signal

Control modules

Multiple function modules and intelligent algorithms are designed for a wide variety of applications:

• 9 running control modules: constant, ramp up, ramp down, stepped up, stepped down, sine, constant dispensing, ramp up dispensing. ramp down dispensing
• 8 logic control modules: direction, delay, event trigger, status output, pause, jump, loop, stop

Each running control module can be used independently for simple routine applications or to configure multi-steps programs with multiple modules for a more complex application.

Content

1x L100-1F peristaltic pump drive

1x Pump head

1x Power supply

With the DG pump head, for each channel:

• 1x 1m of 3-stop 1*1 mm tubing
• 1x 1m of 3-stop 2*1 mm tubing

With the YZ1515X or YZII15 pump head:

• 1x 2m of 16# peristaltic tubing
• 1x 2m of 25# peristaltic tubing

With the YZ2515X or YZII25 pump head:

• 1x 2m of 15# peristaltic tubing
• 1x 2m of 24# peristaltic tubing

With the FG15-13 pump head:

• 1x 2m of 16# peristaltic tubing
• 1x 2m of 25# peristaltic tubing
• 1x Mounting plate

With the FG25-13 pump head:

• 1x 2m of 15# peristaltic tubing
• 1x 2m of 24# peristaltic tubing
• 1x Mounting plate

With the DG15-24 pump head:

• 1x 2m of 16# peristaltic tubing
• 1x 2m of 25# peristaltic tubing

With the DG15-28 pump head:

• 1x 2m of 13# peristaltic tubing
• 1x 2m of 14# peristaltic tubing
• O-rings/Slip-on tubing stops

Specifications

Documentation

? L100-1F peristaltic pump brochure

? L100-1F peristaltic pump datasheet

? L100-1F peristaltic pump user guide