These Molex cables allow you to connect Sensirion SLF3x sensors either to Sensirion SCC1 cables or to your custom setup. The Molex-to-M8 cable is designed for connecting SLF3x-series sensors to SCC1 cables, while the Molex-to-pigtail version enables integration with a custom setup, such as a microcontroller.
General
The Molex-to-M8 cable is specifically designed to connect SLF3x sensors to Sensirion SCC1 cables, which serve as smart interfaces offering RS485 communication and advanced signal processing. From there, the SCC1 cable can be further connected to a computer via USB using an additional RS485-to-USB converter cable, enabling seamless integration with data logging software, lab instrumentation, or PC-based control systems. This setup is ideal for laboratory environments, industrial automation, or any application requiring precise digital flow measurements with minimal configuration.
The Molex-to-pigtail version, on the other hand, exposes individual wires, allowing you to directly connect the SLF3x sensor to your own electronics or microcontroller-based systems (such as Arduino, Raspberry Pi, or other embedded platforms). This version is particularly suited for prototyping, research applications, or embedded product development, where direct access to the sensor's I2C signals is needed and full flexibility in wiring is essential.
Whether you need a plug-and-play solution for a controlled environment or a flexible wiring option for a custom project, these Molex cables are designed to support both standard and advanced use cases involving SLF3x flow sensors.
Content
1x 6pin-Molex to M8 cable for connecting SLF3x-series sensors
or
1x 6pin-Molex to pigtail cable for connecting SLF3x-series sensors
Specifications
| Cable |
SO-MOL-M8 |
SO-MOL-PIGTAIL |
| Compatible Sensors |
SLF3x-series |
| Molex Connector |
6-pin PicoBlade |
| Interface |
M8 (4-pin) |
Pigtail |
| Length |
15 cm |
30 cm |
Documentation
Application note for connecting Sensirion Sensors to Sensirion SCC1-cables
