PHD Ultra OEM Syringe Pump - Darwin Microfluidics

Harvard Apparatus

PHD ULTRA OEM Syringe Pump

Product SKU:

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

$5,363.10 - $13,581.80

Current Stock:

Quantity:

Ask an expert

Adding to cart… The item has been added

Complete Your Setup

Use the checkboxes to select the products you need.

Choose Options

Type (Required)

Harvard Apparatus

PHD ULTRA OEM Syringe Pump

$5,363.10 - $13,581.80

Decrease Quantity of undefined

Increase Quantity of undefined

General
Content
Specifications
Documentation

General

Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.

Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.

Plugs to block unused ports are also available in our shop.

Type

4 options for this product

PHD ULTRA OEM Syringe Pump

SKU: HA-70-3506

Standard

$5,363.10

Available immediately

PHD ULTRA OEM Syringe Pump

SKU: HA-70-3508

Push/Pull

$6,255.20

Available immediately

PHD ULTRA OEM Syringe Pump

SKU: HA-70-3510

4400

$7,743.20

Available immediately

PHD ULTRA OEM Syringe Pump

SKU: HA-70-3514

$13,581.80

Available immediately

The Harvard Apparatus PHD ULTRA OEM syringe pump is the solution for your most demanding applications. The Harvard Apparatus PHD ULTRA OEM syringe pump have superior mechanical drive mechanisms and syringe holding mechanics to achieve the highest performance of any syringe pump. Covering a flow range from 1.56 pL/min up to 216 mL/min with unrivaled accuracy, the OEM series is compact, easy to integrate into your microfluidic setup, and holds syringes ranging from 0.5 µL to 200 mL.

The pump is available in four configurations: standard, push/pull, high pressure, and ultra-high pressure.

General

Without its built-in user interface, Harvard Apparatus PHD ULTRA OEM syringe pump provides the same performance as its standalone equivalent, with a smaller footprint. Smooth flow rates from 1.56 pL/min to 216 mL/min are delivered with an unrivaled accuracy (down to 0.25%). The superior mechanical drive and syringe holding mechanism ensure the highest performance.

Infusion and withdrawal
Small footprint: 29.8 x 14 x 16.5 cm (11.75 x 5.5 x 6.5 in)
Holds plastic, glass, or stainless steel syringe
Fully programmable from the FlowControl software (in option) or with command lines
Advanced connectivity: RS-232 and USB serial inputs, RS-485 or TTL interfaces
2-year warranty

Four types of Harvard Apparatus PHD ULTRA OEM syringe pumps have been developed to meet every requirement:

	PHD ULTRA Standard	PHD ULTRA Push/Pull	PHD ULTRA 4400	PHD ULTRA XF
Application	Low-pressure, microfluidics	For continuous flow applications (cell culture, etc.)	High pressure with stainless steel syringes	Ultra-high pressure
Pump function	Infuse/Withdraw	Push/Pull	Infuse/Withdraw	Infuse/Withdraw
Number of channels	2	4	1	4
Syringe size	0.5 μL up to 140 mL	0.5 μL up to 140 mL	0.5 μL up to 140 mL	20 mL up to 200 mL
Flow range	1.56 pL/min up to 216 mL/min	1.56 pL/min up to 216 mL/min	1.56 pL/min up to 216 mL/min	50.7 nL/min up to 144.08 mL/min
Accuracy	±0.25%	±0.25%	±0.35%	±0.5%
Max. linear force	34 kg (75 lb) @ 100% Force Selection	34 kg (75 lb) @ 100% Force Selection	90.7 kg (200 lb) @ 100% Force Selection	453.6 kg (1000 lb) @ 100% Force Selection

Harvard Apparatus has developed LabVIEW drivers for their pumps, and each pump module can be controlled by ASCII command lines. RS-485 in and out connection ports allow daisy-chaining several pumps, making it easy to control all the pumps from a single USB connection to your computer.

Content

1x Harvard Apparatus PHD ULTRA OEM syringe pump

1x Power supply

Specifications

	PHD ULTRA Standard	PHD ULTRA Push/Pull	PHD ULTRA 4400	PHD ULTRA XF
Type	Microprocessor multiple syringes, infusion/withdrawal programmable	Microprocessor four syringe, push/pull infusion/withdrawal	Microprocessor single syringe infusion/withdrawal programmable	Microprocessor multiple syringe, infusion/withdrawal programmable
Accuracy	±0.25%	±0.25%	±0.35%	±0.5%
Syringe	Type: Plastic, glass or stainless steel Size: 0.5 μL to 140 mL	Type: Plastic, glass or stainless steel Size: 0.5 μL to 140 mL	Type: Plastic, glass or stainless steel Size: 0.5 μL to 140 mL	Type: Plastic, glass or stainless steel Size: 20 mL to 200 mL
Flow Rate	1.56 pL/min up to 216 mL/min	1.56 pL/min up to 216 mL/min	1.56 pL/min up to 216 mL/min	50.7 nL/min up to 144.08 mL/min
Temperature and humidity	4 °C to 40 °C 20% to 80% RH, non condensing	4 °C to 40 °C 20% to 80% RH, non condensing	4 °C to 40 °C 20% to 80% RH, non condensing	4 °C to 40 °C 20% to 80% RH, non condensing
Connectors	RS-232: 9-pin D-Sub Connector RS-485: IEEE-1394, 6 position USB: Type B I/O & TTL: 15-pin D-Sub Connector	RS-232: 9-pin D-Sub Connector RS-485: IEEE-1394, 6 position USB: Type B I/O & TTL: 15-pin D-Sub Connector	RS-232: 9-pin D-Sub Connector RS-485: IEEE-1394, 6 position USB: Type B I/O & TTL: 15-pin D-Sub Connector	RS-232: 9-pin D-Sub Connector RS-485: IEEE-1394, 6 position USB: Type B I/O & TTL: 15-pin D-Sub Connector
Drive Motor	0.9° Stepper Motor	0.9° Stepper Motor	1.8° Stepper Motor	1.8° Stepper Motor
Motor Drive Control	Microprocessor with 1/16 microstepping Min. step rate: 27.5 sec/ustep Max. step rate: 26 µsec/µstep Min. pusher travel rate: 0.18 µm/min Max. pusher travel rate: 190.8 mm/min	Microprocessor with 1/16 microstepping Min. step rate: 27.5 sec/ustep Max. step rate: 26 µsec/µstep Min. pusher travel rate: 0.18 µm/min Max. pusher travel rate: 190.8 mm/min	Microprocessor with 1/16 microstepping Min. step rate: 27.5 sec/ustep Max. step rate: 26 µsec/µstep Min. pusher travel rate: 0.36 µm/min Max. pusher travel rate: 190.8 mm/min	Microprocessor with 1/16 microstepping Min. step rate: 27.5 sec/ustep Max. step rate: 52 µsec/µstep Min. pusher travel rate: 0.18 µm/min Max. pusher travel rate: 91.637 mm/min
Number of Microsteps per one rev of Lead Screw	12800	12800	6400	12800
Average Linear Force	34 kg (75 lb) @ 100% Force Selection	34 kg (75 lb) @ 100% Force Selection	90.7 kg (200 lb) @ 100% Force Selection	453.6 kg (1000 lb) @ 100% Force Selection
Input Power	50 W, 0.5 A fuse	50 W, 0.5 A fuse	50 W, 0.5 A fuse	50 W, 0.5 A fuse
Power Supply	100-240 VAC, 50/60 Hz	100-240 VAC, 50/60 Hz	100-240 VAC, 50/60 Hz	100-240 VAC, 50/60 Hz
Dimensions (H x W x D)	29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in)	29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in)	29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in)	29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in)
Weight	4.5 kg (10 lb)	5.1 kg (11.2 lb)	5.3 kg (11.7 lb)	4.5 kg (10 lb)
Regulatory Certifications	CE, UL, CSA, CB Scheme, EU RoHS	CE, UL, CSA, CB Scheme, EU RoHS	CE, UL, CSA, CB Scheme, EU RoHS	CE, UL, CSA, CB Scheme, EU RoHS

Documentation

?PHD Ultra OEM user manual

Advanced Programmable Syringe Pump PHD ULTRA - Darwin Microfluidics — Choose Options

Harvard Apparatus

Harvard Apparatus PHD ULTRA Syringe Pump

The Harvard Apparatus PHD ULTRA Programmable Syringe Pump is a high-accuracy advanced syringe pump capable of running up to 10 syringes at the same time. This pump represents the latest technology in...

$6,580.90

Harvard Apparatus

PHD ULTRA Infusion Only Syringe Pump

The Harvard Apparatus PHD ULTRA Infusion Only Syringe Pump is a high-accuracy syringe pump capable of running up to 10 syringes at the same time. This pump represents the latest technology in syringe...

$5,129.50

Harvard Apparatus

PHD ULTRA Syringe Rack Upgrade

Upgrade solution for the PHD ULTRA Syringe Pump from Harvard Apparatus for multiple syringes control. If you already own a compatible pump, this rack is sold as an upgrade. When purchased together...

$988.65 - $1,106.90

Harvard Apparatus

PHD ULTRA Standard Pump Module for HAPC

The Harvard Apparatus PHD ULTRA Standard Pump Module for HAPC is the best choice for demanding applications. Harvard Apparatus PHD ULTRA syringe pumps have superior drive and syringe holding...

$4,724.50

New Era Pump Systems

SyringeONE OEM Syringe Pump

The OEM version of the SyringeONE pump. Without its built-in user interface, this single-channel pump is more compact than its standard version while keeping the same performances. Various options...

$520.00 - $1,125.00

PHD ULTRA OEM Syringe Pump

Complete Your Setup

See All Availability

The pump is available in four configurations: standard, push/pull, high pressure, and ultra-high pressure.

General

Content

Specifications

Documentation

You Might Also Like

Ask An Expert

Subscribe to our newsletter

Preferences