Bartels Mikrotechnik
Pressure Control Kit with FluidCube for Bartels MicropumpsProduct Results will show here!
Worldwide Express Shipping
Delivery in 1-3 days for products in stock
Simplified Purchasing
Easily request a quote and track your orders.
Outstanding Support
Support by a team of Engineers and PhDs (Inhouse)
Accessories and consumables for this product
Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.
Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.
Plugs to block unused ports are also available in our shop.
Instead of pumping the liquid directly, the pumps push air into the reservoir and the pressure drives the liquid. Only the flow sensor touches the fluid, so fewer parts get contaminated and cleaning is easier. The pumps only handle air, which extends their lifetime.
The SLF3S-1300F sensor measures the flow in real time and an easy-to-use PID controller in FluidControl Plus adjusts the pressure to hold the setpoint. The pressure volume and the mp-damper reduce pulsation. The kit generates its own pressure, so no external pressure supply is needed.
Control runs in Bartels FluidicStudio on the FluidCube Base, connected to the computer by USB-C.
Flow sensor care: biofilm can form on the sensing element with use and contamination, which distorts the readings. Rinse with IPA after each use and remove deposits with an enzymatic solution: this damage is not covered by the warranty.
3x The Bartels Pump BP7 - Tubing
1x FluidCube Base
1x SLF3S-1300F Flow Sensor (Sensirion)
1x Tygon tubing, ID 1.3 mm, 1 m
1x FluidCube pump cable
1x Syringe with Luer-to-barb adapter
1x USB-C cable
1x FluidControl Plus licence, 1 channel
| Bartels article number | BM-S-0049 |
| Principle | Pressure-driven flow, pumps operate with air only |
| Control | Closed loop with PID, FluidControl Plus in Bartels FluidicStudio |
| Controller | FluidCube Base, USB-C |
| Pumps | 3x The Bartels Pump BP7 - Tubing |
| Pump driver | mp-Driver |
| Flow sensor | Sensirion SLF3S-1300F |
| Wetted parts | Flow sensor only |
| Tubing ID [mm] | 1.3 (0.05 in) |
The Bartels Pump BP7 - Tubing datasheet
Bartels electronic driver datasheet
FluidCube and FluidicStudio manual
Bartels Mikrotechnik
Pressure Control Kit with FluidCube for Bartels Micropumps
Bartels Mikrotechnik
Liquid High Flow Control Kit with FluidCube for Bartels Micropumps
Bartels Mikrotechnik
Liquid Low Flow Control Kit with FluidCube for Bartels Micropumps
Bartels Mikrotechnik
Air Control Kit with FluidCube for Bartels Micropumps
Bartels Mikrotechnik
VOC Monitoring Kit with FluidCube for Bartels Micropumps
Get the latest updates on new products and upcoming sales
Prices, taxes and delivery depend on your country.
Your cart is empty
Your setup is waiting for its first component. Pumps, flow sensors, chips, tubing and fittings: start here.
Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump Driver