Darwin Microfluidics
Luer Lock Check Valve (pack of 10)Product Results will show here!
Support by a team of engineers & PhDs
Support by a team of engineers & PhDs
Support by a team of engineers & PhDs
Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.
Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.
Plugs to block unused ports are also available in our shop.
A check valve for recirculation setup or protection of your equipment, for use in your microfluidic system. This valve is designed to only allow forward flow at < 20 mbar threshold pressures and to negate both back-flow and diffusion when in a closed state.
10x Female to Male Luer Lock check-valve
| Material | Styrene acrylonitrile resin |
| Cracking pressure | 20 mbar |
| Maximum back pressure | 6 bar |
| Burst pressure | 6 bar |
| Maximum retrograde leak rate | 0.1 mL/h (at flow rate 0.5 mL/h) |
| Priming volume | ~ 0.15 mL |
| Sterilization | Ethylene Oxide Gamma irradiation |
Check the chemical compatibilities for this product here: Styrene acrylonitrile resin - Chemical Compatibility Chart
Darwin Microfluidics
Luer Lock Check Valve (pack of 10)
ELVEFLOW
Microfluidic Fittings Luer Lock Kit
ELVEFLOW
MFP Microfluidic Luer-Lock Pressure Sensor
IDEX Health & Science
Microfluidic Fittings Adapter Female Luer to 1/4-28 Male (pack of 10)
Darwin Microfluidics
Male to Male Luer Lock Connector (pack of 10)
Get the latest updates on new products and upcoming sales
Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump Driver