New Era Pump Systems
SyringeTWO OEM Syringe PumpProduct Results will show here!
Worldwide Express Shipping
Delivery in 1-3 days for products in stock
Simplified Purchasing
Easily request a quote and track your orders.
Outstanding Support
Support by a team of Engineers and PhDs (Inhouse)
Accessories and consumables for this product
Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.
Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.
Plugs to block unused ports are also available in our shop.
The Hamilton Duo Syringe Pump puts two syringe drives in one benchtop unit. Syringe, flow rate, direction and target volume are set separately for each drive, so you can run two separate infusion or withdrawal processes in parallel, or combine both drives in one coordinated dual-channel method.
Hamilton makes both the syringes and the pump. The syringe barrel and plunger stay aligned with the drive axis, which limits side loads on the syringe and protects it from early wear.
All settings are made on the 7-inch touchscreen. You choose the syringe from the built-in library, which supplies its dimensions for the flow calculation, or save a custom profile for a compatible third-party syringe. You then enter the flow parameters and volumes and follow both channels in real time. The interface adapts to the pump lying flat or standing upright.
The pump is for research use only. It is not intended for diagnostics or for administration to humans.
Syringes, tubing and fittings are not included.
| Syringes | Holders | Max. syringe volume |
| 1 or 2 | Single-syringe holders (supplied) on one drive or on both | 50 mL per syringe |
| 3 | Dual-Syringe Holder on one drive, single-syringe holder on the other: one synchronized pair plus one independent syringe | 25 mL (pair), 50 mL (single) |
| 4 | Dual-Syringe Holder on both drives: two synchronized pairs, each pair controlled on its own | 25 mL per syringe |
1x Hamilton Duo Syringe Pump (10212610)
2x Single-syringe holders
1x Power cord for the destination country
Not included: syringes, tubing, fittings, additional power cords.
Optional Hamilton accessories, sold separately (contact us to order):
| Part number | 10212610 |
| Syringe size | 0.5 µL to 50 mL |
| Minimum flow rate | 4.97 pL/min with a 0.5 µL syringe (barrel inner diameter 0.103 mm min.) |
| Maximum flow rate | 220 mL/min (50 mL syringe, 32.573 mm maximum barrel inner diameter) |
| Accuracy | ± 0.25% |
| Reproducibility | ± 0.05% |
| Linear force per drive (max.) | 34 kgf (±15%), approx. 333 N (±15%), with 100% force selected |
| Drive motor | Two independent stepper motors, 1.8° microstepper motor |
| Motor drive control | Microprocessor, 1/32 microstepping |
| Step rate | Minimum 6 sec/µstep, maximum 13.18 µsec/µstep |
| Step resolution | 0.0579 µm/µstep |
| Display | 7" TFT colour touchscreen |
| Modes of operation | Simple mode, complex methods |
| Real-time clock | Yes, battery-backed (battery included) |
| Connectors | Barrel power connector, USB Type-A, 3.5 mm footswitch jack |
| Power supply | 100-240 VAC, 50/60 Hz input; 24 VDC, 2.71 A, 65 W output |
| Size (L x W x H) | 28.7 x 29.7 x 16.6 cm (11.30 x 11.69 x 6.54 in) |
| Weight | 6.2 kg |
| Operating temperature | 4 to 40 °C (39.2 to 104 °F) |
| Storage temperature | -10 to 70 °C (14 to 158 °F) |
| Operating humidity | Max. 80% RH up to 31 °C (87.8 °F), decreasing linearly to 50% RH at 40 °C (104 °F) |
| Storage humidity | 20 to 80% RH, non-condensing |
| Pollution degree | Degree 2 |
| EMC classification | Class B equipment, tested for a basic electromagnetic environment (IEC 61326-1) |
| Certifications | CE, CSA, KC |
| Optional accessories | Dual-Syringe Holder, Footswitch, Bubble Sensor, Solenoid Valve with Pressure Sensor |
New Era Pump Systems
SyringeTWO OEM Syringe Pump
Longer
dLSP501X Independent Syringe Pump
Advanced Microfluidics
LSPone Laboratory Syringe Pump
New Era Pump Systems
SyringeONE OEM Syringe Pump
Advanced Microfluidics
Glass Syringes for SPM High Volume Industrial Syringe Pump
Get the latest updates on new products and upcoming sales
Prices, taxes and delivery depend on your country.
Your cart is empty
Your setup is waiting for its first component. Pumps, flow sensors, chips, tubing and fittings: start here.
Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump Driver