The Liquid Low Flow Control Kit is designed for precise handling of very small liquid volumes in applications where stability, accuracy and gentle fluid delivery are critical. Typical flow ranges from 5 µl/min to 2 ml/min.
The kit contains BP7 Tubing pumps, the mp-Multiboard2 controller, the mp-Lowdriver pump driver, an SLF3S-0600F flow sensor, the FluidControl Plus software license, and various accessories.
General
The Liquid Low Flow Control Kit is designed for applications that require accurate and stable liquid delivery at very low flow rates. It supports controlled liquid handling over extended operation times, making it especially suitable for biological, analytical, and research applications where small-volume precision is essential.
Using closed-loop control and real-time feedback from the integrated SLF3S-0600F flow sensor, the system continuously adjusts pump operation to maintain the desired low flow rate. This feedback-based approach helps reduce variability and supports highly accurate dosing, even at minimal flow levels required for sensitive applications.
The kit can be controlled through FluidControl Plus and Bartels Fluidic Studio, allowing users to configure flow parameters, monitor system behavior, and maintain stable flow conditions during long-duration experiments. With a continuous flow rate range of 5 µl/min to 2 ml/min, the system is well-suited for ultra-low-volume liquid handling and precise perfusion tasks.
The included mp-damper helps reduce pulsation and supports smooth, gentle fluid delivery. Combined with compact Bartels components and a high functional density, the Liquid Low Flow Control Kit provides a cost-efficient solution for high-precision low-flow control in compact fluidic setups.
This kit is especially useful for:
- cell culture perfusion systems,
- biological research and assays,
- microfluidic experiments,
- ultra-low dosing applications,
- long-duration low-flow perfusion setups.
Content
3x Bartels Pump BP7 Tubing
1x mp-Multiboard2 Evaluation Board
1x mp-Lowdriver Pump Driver
1x SLF3S-0600F Flow Sensor, including cable and connectors
1x mp-damper Pulsation Damper
1x Tygon tubing ID 1.3 mm, 1 m
1x Pump cable
1x Syringe with Luer-to-Barb adapter
1x Micro-USB cable
1x FluidControl Plus License
Documentation
More information about each component can be found on its respective product page.
Click here to find datasheets, application notes, software and manuals for Bartels products.
Check the chemical compatibility for the tubing here: Tygon LMT-55 - Chemical Compatibility Chart.
